EUROCUT HLF

Þ Entirely unlabelled product

Þ Boron and amine free

Þ Excellent residual corrosion protection

Þ Tight milky

Þ High oil content

Þ Lubricity enhancers

Concentration %

Þ General machining 5-6

Þ Thread cutting 6-10

Þ Deep hole drilling and boring 6-8

Þ Reaming 6-10

Þ Creep feed grinding 3-5

Þ Grinding 2-3

Þ All ferrous alloys including stainless steel

Þ Wide variety of aluminium alloys

Þ Inconel and other high spec alloys

Þ Titanium alloys

Þ Plastics and other non ferrous materials

Þ Typical 50 to 400 ppm ( Calcium )

Þ Designed for low foam

Þ Suitable for high & low pressure CNC systems

Þ Boron and amines

Þ Silicon antifoam

Þ Chlorine and Sulphur

Þ Triazine biocide

Þ Sodium nitrite

Þ Phenols

Þ Colouring dyes

A full health and safety data sheet is available on request. Additional information including advice on suitable disposal methods is also available from the European Oil Technical Department

Þ EINECS

Þ PICCS

Þ Store inside warehouse

Þ Ideal storage temperature is between 5^oC and 35^oC

Þ Shelf life of 6 months from the date of supply

Þ Avoid water collecting on barrel rim

European Oil advise the use of automated mixing systems. If the fluid is to be mixed manually, always add the concentrate to the water with maximum agitation. The emulsion strength should always be checked using a calibrated refractometer. Details of where to purchase equipment and how to use it are available from the European Oil Technical Department.