EUROCUT 797 MOD

Water-mix Metalworking Fluid

Þ Exceptional machining performance

Þ Superb tool life

Þ Multi-metal compatibility

Þ Good milky emulsion

Þ Medium oil content

Þ Synthetic lubricity enhancers

Concentration %

Þ General machining 5 - 6

Þ Thread cutting and forming 6 - 8

Þ Deep hole drilling and boring 8 - 10

Þ Reaming 8 - 10

Þ Creep feed grinding 5 - 6

Þ All aluminium alloys including Aerospace

Þ Titanium, stainless steels

Þ Inconel and other high spec alloys

Þ Plastics and other non ferrous materials

Þ Typical 50 to 400 ppm ( Calcium )

Þ Designed for low foam

Þ Suitable for high & low pressure CNC systems

Þ Boron

Þ Secondary amine

Þ Triazine biocides

Þ Chlorine and Sulphur EP additives

Þ Sodium nitrite

Þ Silicone oil

Þ Phenolic couplers, nonyl phenol and NP ethoxylates

Þ Colouring dyes

A full health and safety data sheet is available on request. Additional information including advice on suitable disposal methods is also available from the European Oils Technical Department

Þ EINECS

Þ TSCA

Þ Store inside warehouse

Þ Ideal storage temperature is between 5^oC and 35^oC

Þ Shelf life of 6 months from the date of supply

Þ Avoid water collecting on barrel rim

EOC advise the use of automated mixing systems. If the fluid is to be mixed manually, always add the concentrate to the water with maximum agitation. The emulsion strength should always be checked using a calibrated refractometer. Details of where to purchase equipment and how to use it are available from the European Oils Technical Department .