EOC EUROCUT 444 BIOSTABLE SEMI-SYNTHETIC CUTTING FLUUID

Description

Eurocut 444 is the latest technology in cutting fluids and has considerable advantages over conventional solubles. It is a semi-synthetic product which when mixed with water forms a translucent emulsion that is completely biostable. The biostable properties mean that the emulsion does not degrade or produce bad odours, and the emulsion needs little or no maintenance. The formulation does not contain cresols or phenols or nitrites. Rust and corrosion protection are outstanding, and no sticky residues or sludges are deposited on machine parts.

Eurocut 444 has the added benefit of a chlorinated EP package and the semi-synthetic formulation gives stable emulsions over long periods even in difficult environments created by bacterial attach or tramp oil contamination.

The inclusion of more than 40% mineral oil give an optimum balance of stability, machining performance, foam and machine tool corrosion protection together with very fluid residues.

Application

Eurocut 444 has been developed to be suitable for a wide range of diluent waters but is specifically useful when applied in moderately soft water or in applications with higher than normal fluid velocities. In these conditions Eurocut 444 will have a low foaming tendency by virtue of its component chemistry.

Benefits

· Excellent surface finishes

· Latest technology suitable for heavy machining operations on all common materials

· Biostable translucent emulsion

· Excellent performance in most general machining

· Good filterability

· No bad odours, easily maintained emulsion

· High resistance to bacterial attack

· Low maintenance with a predictable sump life

· Chlorine-free

· Nitrite-free

· Cresol-free

· Suitable with all normal ferrous metals including low order stainless steel, certain non-ferrous materials, high tensile steel, yellow metals and aluminium.

Eurocut 444 is easily mixed at all dilutions. The correct mixing procedure is to add the oil to the water whilst stirring vigorously (never add water to the oil as this will cause problems with the emulsion).

Dosage Instructions

Concentration: General to heavy machining 3% - 8%

When mixed, will form a milky blue semi-translucent emulsion.

Technical Information

Eurocut 444

Appearance

Odour

Specific Gravity @ 20°C

Flash Point (PMFC)

PH @ 3% emulsion

Storage

IP Corrosion Test

Health and Safety

Normally safe in use. Before using this product, reference should be made to the relevant Material Safety Data Sheet.