Description

Eurocut 444HDS is a multipurpose higher oil containing biostable semi-synthetic watermix coolant.

Whilst not considered a traditional EP Fluid EUROCUT 444HDS improved load carrying performance when compared with conventional semi-synthetic fluids.

Eurocut 444HDS has been developed to be suitable for a wide range of diluent waters. It is specifically useful applied in moderately soft water, or in applications with higher than normal fluid velocities. In these conditions the product will have a low foaming tendency by virtue of its component chemistry.

The inclusion of more than 40% mineral oil gives an optimum balance of stability, machining performance, foam and machine tool corrosion protection together with very low fluid residues.

The semi synthetic formulation gives a stable emulsion over long periods, even in difficult environments created by bacterial attach or tramp oil contamination.

Eurocut 444HDS is an ideal general purpose semi-synthetic fluid suitable for a multitude of operations on various types of machine tools, lending itself to grade rationalisation.

Application

Eurocut 444HDS is intended to be a multipurpose product with the added lubricity required for applications such as tapping and is suitable for applications on aluminium alloys.

As a watermix biostable metalworking fluid producing micro-emulsions on dilution with water, the product is ideally suited as a general purpose cutting fluid for the majority of medium to medium-hard ferrous machining applications. The higher levels of biostability and corrosion inhibition within the emulsion also allow its use on the previously more difficult situations with respect to emulsion stability and residual corrosion.

Benefits

· Biostable - resists bacterial attach and promotes a long service life.

· Suitable for both ferrous and certain non-ferrous materials

· Suitable for a use in a wide range of diluent water including hard water

· Higher oil content provides good cutting performance and a high level of corrosion protection to both machine tool and component.

· Exhibits a high level of stability and resistance to contamination

· Free from Chlorine, Sulphur, Phenol and Nitrites

· Resistant to foam formation

· Multi-metal compatibility

Dosage Instructions

Eurocut 444HDS is easily mixed at all dilutions. The correct mixing procedure is to add the oil to the water whilst stirring vigorously (never add water to the oil as this will cause problems with the emulsion).

Concentration:

· General machining, drilling and sawing 3% - 5%

· Medium severity operations -difficult feedstock 5% - 10%

· Creep feed grinding 2% - 4%

Emulsion is a semi-translucent type

Technical Information

Eurocut 444HDS

Health and Safety

Normally safe in use. Before using this product, reference should be made to the relevant Material Safety Data Sheet.