5 ALUMINIUM CORROSION CONTROLLER C.W.T.
Liquid cooling water corrosion and scale inhibitor for all metal protection especially developed to protect against Aluminium corrosion and pitting
Description
Aquamarine Aluminium Corrosion Controller is an easy to use liquid that inhibits electrolytic corrosion, cavitational corrosion and controls scale and sludge. It is also compatible with a wide range of hoses, gaskets and seals. It is suitable for high, medium and low speed diesel engine cooling water systems.
Aquamarine Aluminium Corrosion Controller passivates metal surfaces and combines with sludge, scale and rust deposits to allow their gradual removal. It is totally non-hazardous and accurate and safe in use.
Uses
-
Special protection for aluminium
-
Internal combustion engine and compressor cooling systems
-
Heat pump water systems
-
Recirculating cooling water systems
-
Hot water heating systems
-
Chilled water systems
-
Hot chilled water systems
-
Ice melting water systems.
Aquamarine Aluminium Corrosion Controller should be fed directly by the bypass pot feeder to the main circulating line or into the cooling water expansion tank.
Target = 0.5% (meter available for checking) |
||||
| 0 | 0.17 | 0.34 | 0.5 | |
| Ltrs/1000 Ltrs make up | 5.0 | 3.4 | 1.7 | 0 |
Usual levels for chloride should be 50 p.p.m. and 100 p.p.m. Hardness CaCO3. pH should be maintained between 8.3 and 9.0. Please check with your equipment manufacturer for this.
Log sheets should be returned to Aquamarine on a monthly basis for analysis.
Pack Size 25 litres