SAFETY DATA SHEET
TOTAL HARDNESS BUFFER (TH2)
Issued: 23/10/00
Revision No: 1
Bayer-Wood Technologies, 2 Duddage Manor Business Park, Brockeridge Road, Twyning, Tewkesbury, GL20 6BY UK
Tel: 01684 290077
1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING
Product name: TOTAL HARDNESS BUFFER (TH2)
Product code: RT1141 /rd1903
Synonyms: TH2
Use / description of product: Liquid. Irritant.
2. COMPOSITION / INFORMATION ON INGREDIENTS
Ingredient 1: RAW MONOETHAOLAMINE 30-60%
[Xn] R20; [Xi] R36/37/38;
3. HAZARDS IDENTIFICATION
Main hazards: Harmful by inhalation. Irritating to eyes, respiratory system and skin.
4. FIRST AID MEASURES (SYMPTOMS)
Skin contact: There may be mild irritation at the site of contact.
Eye contact: There may be irritation and redness.
Ingestion: There may be soreness and redness of the mouth and throat.
Inhalation: There may be irritation of the throat with a feeling of tightness in the chest.
4. FIRST AID MEASURES (ACTION)
Skin contact: Drench the affected skin with running water for 10 minutes or longer if substance is still on skin.
Eye contact: Bathe the eye with running water for 15 minutes. Transfer to hospital for specialist examination.
Ingestion: If conscious, give 1 pint of water to drink immediately.
Inhalation: Remove casualty from exposure ensuring one's own safety whilst doing so.
5. FIRE-FIGHTING MEASURES
Extinguishing media: Water. Dry chemical powder. Alcohol foam Foam Mist Do not use carbon dioxide.
Exposure hazards: In combustion emits toxic fumes.
Protection of fire-fighters: Wear self-contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Refer to section 8 of SDS for personal protection details.
Environmental precautions: Do not allow large quantities to enter local drainage systems
Clean-up procedures: Neutralise with dilute hydrochloric acid testing with litmus paper periodically. Wash down the drain with large amounts of water.
7. HANDLING AND STORAGE
Handling requirements: Ensure there is sufficient ventilation of the area. Avoid direct contact with the substance.
Storage conditions: Store in cool, well ventilated area. Keep container tightly closed.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering measures: Ensure there is sufficient ventilation of the area.
Respiratory protection: Self-contained breathing apparatus must be used in handling.
Hand protection: Protective gloves.
Eye protection: Safety goggles. Face-shield.
Skin protection: Protective clothing with elasticated cuffs and closed neck.
9. PHYSICAL AND CHEMICAL PROPERTIES
State: Liquid
Colour: Colourless
Odour: Odourless
Viscosity: Non-viscous
Oxidising: Non-oxidising (by EC criteria)
Evaporation rate: Fast
Solubility in water: Miscible in all proportions
pH: 10-11
10. STABILITY AND REACTIVITY
Stability: Stable under normal conditions.
Conditions to avoid: Heat. Flames.
Materials to avoid: Oxidising agents.
Haz. decomp. products: In combustion emits toxic fumes.
11. TOXICOLOGICAL INFORMATION
12. ECOLOGICAL INFORMATION
13. DISPOSAL CONSIDERATIONS
Waste disposal: Dissolve in excess water and adjust pH to neutrality if necessary. Dispose of as normal industrial waste.
Disposal of packaging Dispose of as normal industrial waste. NB: The user's attention is drawn to the possible existence of regional or national regulations regarding disposal.
14. TRANSPORT INFORMATION
ADR / RID
UN no: : none
IMDG / IMO
IATA / ICAO
15. REGULATORY INFORMATION
Hazard symbols: Harmful.
Risk phrases: R20: Harmful by inhalation.
R36/37/38: Irritating to eyes, respiratory system and skin.
Safety phrases: S2: Keep out of the reach of children.
S26: In case of contact with eyes, rinse immediately with plenty of water and seek
medical advice. Note: The regulatory information given above only indicates the principal regulations specifically applicable to the product described in the safety data sheet. The user's attention is drawn to the possible existence of additional provisions which complete these regulations. Refer to all applicable national, international and local regulations or provisions.
16. ADDITIONAL INFORMATION
Additional information: The information contained within this MSDS is based on bulk quantities. The user should bear in mind the reduced hazard associated with the small quantities normally associated with test kit reagents, and adjust their responses accordingly. Risk phrases used in s.2: R20: Harmful by inhalation. R36/37/38: Irritating to eyes, respiratory system and skin.
Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling or from contact with the above product.