TANK CLEANER G.P., Cleaning and maintenance products, Aquamarine Chemicals, marine chemicals

No#	Product
09	Aquawash - General Purpose degreaser
10	Quickbreak- solvent engine room/ bilge degreaser
11	Electrical cleaner - motor and parts cleaner
12	Air Cooler Cleaner / Carbon Remover in-service cleaning and manual use
13	De-scaling powder boilers
14	Diesel Engine Cooling Water Inline Cleaner
15	Purifier Disc Cleaner combined Rust Streak Remover
20	Natural Zest - General Purpose Cleaner Decks, bulkheads, engine rooms.
23	RO Plant Conditioner
24	Aqua-Floc - flocculant for waste water and effluent waste treatment
25	Aquatan Rust Converter - rust treatment
27	Boiling out compound - for passivation of new boilers and boiler tubes/components
31	Aquamarine RO High pH Cleaner/Sanitiser
32	Aquamarine RO Low pH Cleaner/Sanitiser
33	Aqua Membrane Biocide
34	Aqua Polysperse A
42	Germex Detergent Cleaner - Galley Cleaner
43	Sediment Remover
44	Descaling Liquid
45	Oil Spill Dispersant Type 1
45A	Oil Spill Dispersant Type 2 & 3
46	Quickbreak Solvent - Engine Room Cleaner
47	Tank Cleaner G.P.
48	Tank Cleaner H.D.
49	General Purpose Degreaser - Solvent
50	Emulsion Breaker
51	H.D. Cement Descaler
52	Cement Retarder
53	Fishguard
67	Graffiti/Rubber Mark Remover
68	Heavy Duty Foodsafe Foam Tile Cleaner

47 TANK CLEANER G.P.

Description

Highly compatible solvent emulsion cleaner Aquamarine Tank Cleaner G.P. is suitable for localised heavy duty degreasing and tank cleaning. It is effective on mineral oil residues, natural oils and petroleum based chemicals. An added benefit when in aqueous solution is the capability for its emulsion to break in a matter of hours. This allows the oil released to be reclaimed.

Uses:

Cleaning oil coolers, fuel oil pre-heaters, lube oil exchangers
Cleaning cargo tanks, double bottom tanks, bilges
General oil cleaning
Removal of general engine room oil contamination
Degreasing engine cooling water systems/boilers
Recommended for use with high pressure and steam cleaning equipment

Application

Aquamarine Tank Cleaner G.P. can be used undiluted for hand spray, brush or immersion soaking. Injection cleaning will require concentrations between 0.1% to 5% diluted with either fresh or salt water. Aquamarine Tank Cleaner G.P. may be used to clean the majority of tank lining materials including zinc silicate coatings. For advice on tank cleaning application contact Aquamarine Chemicals UK Head Office or your local agent.